Marantz PM5005 - Manual (Page 30)

Setting the Auto Standby mode
You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input (Auto Standby
mode).
Auto Standby mode is set to on by default.
.
Standby indicator
SOURCE DIRECT
Turning Auto Standby mode off
1
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode off.
The power indicator flashes once.
Turning Auto Standby mode on
1
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode on.
The standby indicator flashes three times.
You can also press SOURCE DIRECT on the remote control unit for this operation.
Contents Connections Playback Settings Tips Appendix
30 Front panel Rear panel
Remote control
unit
Index