O dynamic compression, O low frequency effects – Marantz SR5009 User Manual
Page 153
o Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High:
These set the compression level.
Off:
Dynamic range compression is always off.
0 “Auto” can only be set when Dolby TrueHD signals are input.
0 The default setting is “Off”. When the input signal is Dolby TrueHD source, the
default setting is “Auto”.
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
n When “Input Mode” is set other than to “7.1CH
IN”
-10 dB – 0 dB (Default : 0 dB)
n When “Input Mode” is set to “7.1CH IN”
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)
For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS movie sources: -10 dB
153