Marantz M-CR610 Quick Start - Manual (Page 5)

4
On
[Network Control]
Press ENTER to use the Maran...
Off
[Network Control]
Press ENTER to use low power....
Network Control
Setup Complete!
Select Network Control ON
to control M-CR610 from
your smartphone, use Apple
AirPlay ® and maintain constant
network access. Power
Consumption during standby
power will be slightly higher.
Select Network Control OFF
to reduce power consumption
during standby. You can not
turn on your M-CR610 from
your smartphone or use Apple
AirPlay until your M-CR610
is powerd on manually and
connects to your network.
Select language
Please wait as completing the
connection can take a few minutes
The front panel of the M-CR610 will show
the status of the connection
Within 2 minutes, Press
a n d H o l d the red Wi-Fi
CONNECT button on the
back of your M-CR610 for 3
seconds
Please wait while your M-CR610
connects to your wired
network.
Connected!
Connected!
Select your network
name
If your network name is not
listed, select “Rescan”
Enter your network
password using the
number keys on the
remote control Connected!
Wi-Fi Sharing
Network(WPA2-...
[Select Network]
: enter : back
100%
[Enter Wi-Fi Password]
: a :character type 1~9 +10
A B C D
Waiting for connect...
[Quick Setup]
: cancel
Press the red Wi-Fi CONNECT
Button on the back of your
M-CR610
T h i s m e s s a g e w i l l
appear on your
iOS device
Select “Allow”
Connected!
lgnore Allow
Share Wi-Fi Settings?
Do you want to share your Wi-fi
settings so this accessory can
connect to the Wi-Fi network?
English
[Select Language]
: enter select
Française Español English
1.M-CR610U_QuickGuide_ENG_Final_0527.indd 4 1.M-CR610U_QuickGuide_ENG_Final_0527.indd 4 2013/05/29 19:09:43 2013/05/29 19:09:43