Marantz SR4320 - Manual (Page 8)

3
ENGLISH
NAMES AND FUNCTIONS
FRONT PANEL
q P OW E R O N / S TA N D B Y sw i t ch a n d
STANDBY indicator
When this switch is pressed once, the unit turns ON and display appear
on the display panel.
When pressed again, the unit enters the standby mode and the
STANDBY indicator lights.
To turn the power ON from standby mode, press any of the function
buttons of the main unit or the MAIN POWER button of the remote control
unit.
When the STANDBY indicator lights up, the apparatus is NOT
disconnected from the AC supply mains.
w PHONES jack for stereo headphones
Conventional dynamic headphones can be plugged in here.
Note:
When using headphones, the speaker A and/or B are switched
automatically to OFF and the sound from the speakers is muted.
The speaker A and/or B return to the previous setting as soon as the
plug is removed from the jack.
e MULTI-JOG control knob
Turn the control (BALANCE, TREBLE or BASS) knob selected by the
JOG MODE button to adjust (the balance, treble or bass).
r Function selector buttons
These buttons are used to select the sources. The selected source name
will be displayed on the front display.
The video function selector, such as DVD, VCR and DSS, selects video
and audio simultaneously.
Audio function sources such as CDR/MD, TAPE, CD, PHONO and
TUNER may be selected in conjunction with a Video source.
This feature (Sound Injection) combines a sound from one source with
a picture from another.
Choose the video source first, and then choose a different audio source
to activate this function.
t JOG MODE button
Press this button to adjust BALANCE and TONE CONTROL (BASS/
TREBLE). Each time this button is pressed, the mode changes as
BAL (BALANCE)
→ TRE (TREBLE) → BASS → BAL (BALANCE). If this
button is pressed in Source Direct Mode, Source Direct is cancelled.
y SPEAKERS (system A or B) button
Press this button to select speaker system(s) to use. Each time this
button is pressed, the selected speaker(s) is changed as, only A is on
→ only B is on → both A and B are on → both A and B are off. The
corresponding indicator(s) of the active speaker system(s) light up.
If headphones are connected, both A and B are set off automatically.
u S (Source)-DIRECT button
When this button is pressed, the audio signal will bypass the balance
and tone control circuit to provide the pure sound quality.
To return not to bypass the balance and tone control circuit, press
S-DIRECT button again or press JOG MODE button.
i SLEEP (Sleep timer) button
This button is used for setting the sleep timer.
o MUTE button
Press this button to mute the output to the speakers. Press it again to
return to the previous volume level.
!0 CLEAR button
Press this button to clear the tuner preset station.
!1 MEMORY button
Press this button to enter the tuner preset memory numbers and station
names.
!2 TUNING/PRESET up ( ) and down ( )
buttons
During reception of AM or FM, you can scan the other frequencies or
select another preset station pressing these buttons.
!3 F (Frequency)/P (Preset) button
During reception of AM or FM, you can change the function of the UP/
DOWN buttons for scanning frequencies or selecting preset stations by
pressing this button.
!4 MODE button
Press this button to select AUTO mode or MONO mode when the FM
band is selected.
!5 SPEAKERS indicator
These indicators show active speaker system(s).
!6 DISPLAY OFF indicator
Lights up when you select “Display off”.
!7 Infrared sensor
This sensor receives infrared signals from the remote control unit.
!8 VOLUME control knob
Adjusts the overall sound level. Turning the control clockwise increases
the sound level.
!9 Display