Dixon 13782-0503 - Manual (Page 34)

34
BELTS:
Check belts every 50 hours. Replace any belts found to
be in poor condition.
BELT TENSION:
42” Deck
Mower Deck Serpentine Belt-P/N 6109
Manual adjustment. Refer to illustration below.
Engine to Mower Deck Belt-P/N 5861
Auto tensioner with spring loaded idler.
No adjustment required.
50” Deck
Mower Deck Serpentine Belt-P/N 1300
Manual adjustment. Refer to illustration below.
Engine to Mower Deck Belt-P/N 7174
Auto tensioner with spring loaded idler.
No adjustment required.
Idler Weldment
“L” Rod
Idler Shock
Mount
Hex Nut
Tighten or Loosen
Hex Nut to achieve
this dimension
3/4”
(42”/50” Serpentine)
CARE & MAINTENANCE