Lynx Studio L22 - Manual (Page 27)

Page 27
Appendix
LStream Expansion Ports
Number One external and one internal
Compatibility Supports Lynx ADAT, AES, TDIF, and other multichannel
expansion modules
Type High-speed serial, eight channel input and output (each port),
24-bit data, 96kHz rate
Clock I/O
Number External: one input and output, BNC connectors on L2Sync
Cable
Internal: one input and output on board-mounted headers
Level / Impedance TTL / 75
Ω
Type Input: word clock, 256X word clock, 13.5 and 27 MHz clocks
Output: word clock
On-board Digital Mixer
Channel Capacity 32 input channels, 16 sub outputs
Resolution / Dither 32-bit / TPDF, Shaped TPDF, or RPDF
Monitor Mixing Any input to multiple outputs
Metering Peak levels to -120 dB on all inputs and outputs
Connections
Audio Port Bracket-mounted 25-pin female D-sub connector for analog
audio input and output
Sync Port Bracket-mounted 15-pin high-density female D-sub connector
for digital input and output, sync in and out
Cables (Included)
L22Audio Cable 25-pin male D-sub to male and female XLR connectors on six-
foot shielded twisted pair cabling
L22Sync Cable 15-pin high-density male D-sub to (1) male and (1) female
XLR on six-foot shielded twisted pair cabling and (2) female
BNC connectors on two-foot 75
Ω
coaxial cabling
Software
Windows 98/ME Drivers for MME, ASIO 2.0, and DirectSound
Windows NT/2000/XP Drivers for MME and ASIO 2.0
Macintosh Drivers for ASIO 2.0
Lynx L22 Mixer App Provides complete control of digital mixer and all hardware
settings.
General
PCI Bus Version 2.2 compliant
Data Transfers Up to 132 Mbytes/sec using custom 16-channel, zero-wait
state, scatter-gather DMA engine; bus mastering
Size 5.0" H X 7.4" W X 0.75" D (half-size PCI card)
Shipping Weight 3.25 lbs. with cables
Certifications CE and FCC Class B