Lynx Studio LynxTWO User Manual - Manual (Page 27)

Page 27
Appendix
SMPTE Time Code I/O
Type LTC receiver (in) and generator (out) , BNC connectors on
L2Sync Cable
Frame Rates 24, 25, 29.97, 30 Hz - drop and non-drop
Input Sync Rate 1/30 to 80 times nominal frame rate
Input Levels 200 mV to 10V / 10K
Ω
Output Level 1V / 75
Ω
Clock I/O
Number External: one input and output, BNC connectors on L2Sync
Cable
Internal: one input and output on board-mounted headers
Level / Impedance TTL (clock signals) / 1Vpp (video) 75
Ω
Type Input: word clock, 256X word clock, 13.5 and 27 MHz video
clocks, NTSC or PAL composite video
Output: word clock
On-board Digital Mixer
Channel Capacity 32 input channels, 16 sub outputs
Resolution / Dither 32-bit / TPDF, Shaped TPDF, or RPDF
Monitor Mixing Any input to multiple outputs
Metering Peak levels to -114 dB on all inputs and outputs
Connections
Audio Port Bracket-mounted 25-pin female D-sub connector for analog
audio input and output
Sync Port Bracket-mounted 15-pin high-density female D-sub connector
for digital input and output, sync in and out
Cables (Included)
L2Audio Cable 25-pin male D-sub to male and female XLR connectors on six-
foot shielded twisted pair cabling
L2Sync Cable 15-pin high-density male D-sub to (1) male and (1) female
XLR on six-foot shielded twisted pair cabling and (4) female
BNC connectors on two-foot 75
Ω
coaxial cabling
Software
Windows Drivers Windows 98 / ME / NT/ 2000 / XP: MME, ASIO 2.0, and
DirectSound
Macintosh Drivers ASIO 2.0 for OS 9
LynxTWO Mixer App Provides complete control of digital mixer and all hardware
settings.
General
PCI Bus Version 2.2 compliant
Data Transfers Up to 132 Mbytes/sec using custom 16-channel, zero-wait
state, scatter-gather DMA engine; bus mastering
Size 5.0" H X 7.4" W X 0.75" D (half-size PCI card)
Shipping Weight 3.25 lbs. with cables
Certifications CE and FCC Class B