Luminox 1800 Series - Manual (Page 6)

I II III
30
10 20
12
3
6
9
12
2
4
6
8
10
1 11
3
5 7
9
15
60
30
45
0 4
04
I II III
30
10 20
12
3
6
9
12
2
4
6
8
10
1 11
3
5 7
9
15
60
30
45
0 4
04
Small
minute hand
Reference time
Reference time
Setting the reference time
* Pull out the crown to position III
(second hand stops. The display changes
from alarm time to reference time.)
Activating the setting mode.
Press the push-button for at least
2 seconds. As soon as the small minute
hand jumps forward one minute, this
mode is active.
Short pressing (less than 1 second):
the reference time is moved forward by
the minute.
Medium pressing: (1–2 seconds):
the reference time is moved forward by
the hour.
Long pressing (longer than 2 seconds):
the reference time is moved forward until
the push-button is released.
Please note:
* In order to set the time to the
exact second, must be pulled
out when the second hand is in
position «60» ( ). III
Once the hour and minute hands
have been set, must be pushed
back into position I at the exact
second.
I II III
30
10 20
12
3
6
9
12
2
4
6
8
10
1 11
3
5 7
9
15
60
30
45
0 4
04 What is the reference time?
The current time is displayed by means of
the hour and minute hand.
Parallel to the current time, the reference
time runs in the background: the alarm time
refers itself to this reference time. Therefore,
resetting the time also requires the identical
correction of the reference time.
If the reference time is not synchronized
with the current time, this results in the alarm
signal being emitted at a different
time to the set alarm time.
Alarm time
* Push the crown back into position I
(the display changes from reference time
to alarm time).
A signal indicates that the alarm is
switched off.