Directed Video HVM580 - Manual (Page 14)

M Maaiinntteennaannccee
N NO OTTEE:: Before using remote after installation, remove the battery plastic protective
slip.
1. Move the small latch to the right and slide out the battery holder.
2. Remove old battery and replace it with a new battery (CR2025) with the posi-
tive “+” sign facing as shown above.
3. Push battery holder back into its compartment until it is locked.
P PR RE EC CA AU UT TIIO ON NS S
1. Properly dispose of used battery.
2. Do not misuse battery by shorting the positive “+” and negative “-” terminal or
put it into fire. Overheating may cause the battery to explode and cause a fire haz-
ard.
3. If the remote is not to be used for a long period, remove the battery from the
remote to prevent damage from battery leakage.
4. To avoid accidents, prevent children from playing with the battery.
Remote Controller
Battery
Battery Holder Latch
+ side
1 14 4
© 2005 Directed Electronics, Inc.