Directed Electronics 1500ESP - Manual (Page 36)

33
© 1999 Directed Electronics, Inc.
QUICK REFERENCE GUIDE:
Arming
■ To arm, press . When the system arms, you will hear a short chirp,
and the parking lights will flash once.
Arming while driving
■ To arm the system while driving, press
on your transmitter while the
vehicle is running. The system will chirp once and then once more to
indicate that the ignition is on.
Disarming
■ To disarm, press . You will hear two chirps, and the parking lights
will flash twice.
High security disarm
■ For high security disarm, press on your transmitter and the siren will
stop sounding. To completely disarm the security system, press
again and the system will chirp 4 or 5 times (reporting the trigger).
Disarming without a transmitter
■ Turn on the ignition. Press the Valet ® switch within 15 seconds. The sys-
tem should now disarm. If it does not, you may have waited too long,
so turn the ignition off and on and try again.
Silent Mode ™
■ Pressing
briefly before arming or disarming will eliminate the con-
firmation chirp(s) for that one operation only.
Panic Mode
■ Press for 1 second, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for 30 seconds. To stop Panic
Mode at any time, press
on the transmitter again.
To remote start the vehicle
■ Press and simultaneously. The parking lights will turn on (if con-
nected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■ To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet ® switch_________________________________
Number of Valet ® switch pulses for disarming_______________
Cut along dotted line and f
old f
o
r a quick and eas
y r
efer
ence to k
eep in y
our pur
se or w
allet.
✂
✂