Directed Electronics 1500ESP - Manual (Page 30)

27
© 1999 Directed Electronics, Inc.
system is in Valet ® Mode, the LED will shut off. If the system
remains in Valet ® Mode, the LED will come back on the next
time the ignition is turned on and then back off.
Programming Options
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require installation labor.
The following is a list of the programmable options, with the fac-
tory settings in Bold.
■ Active arming (transmitter only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
■ Arming/disarming siren chirps on or off.
■ The ignition controlled door lock feature on or off: When
this feature is programmed on, the doors will lock three sec-
onds after the ignition is turned on, and unlock when the
ignition is turned off. The system can also be programmed
to prevent the door from locking when the ignition is
turned on with any door open. If your installer is program-
ming the security system with the DEI ® Bitwriter or a per-
sonal computer and the TechSoft ™ Programmer, ignition lock
and unlock are independent features and can be pro-
grammed separately.