Chapter 1 precautions – Lumens Technology PS400 User Manual
Page 5
English - 4
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the Digital
Visualizer:
1. Do not place the Digital Visualizer on an unstable trolley, stand or table.
2. Do not use the Digital Visualizer near water or source of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the Digital Visualizer. If you are not
sure of the type of power available, consult your dealer or local electricity
company for advice.
5. Place the Digital Visualizer can be easily unplugged.
6. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
7. Do not overload wall sockets, extensions leads or multi-way plug boards as
this may cause fire or electric shock.
8. Do not place the Digital Visualizer where the cord can be stepped on as this
may result in fraying or damage to the lead or the plug.
9. Unplug the projector form the wall socket before cleaning. Use a damp cloth
for cleaning. Do not use liquid or aerosol cleaners.
10. Do not block the slots and openings in the projector case. They provide
ventilation and prevent the Digital Visualizer from overheating. Do not place
the Digital Visualizer on a sofa, rug or other soft surface or in a built-in
installation unless proper ventilation is provided.
11. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the Digital Visualizer.
12. Except as specifically instructed in this User’s Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
13. Unplug the Digital Visualizer during thunderstorms or if it is not going to be
used for an extended period, do not place the Digital Visualizer or remote
control on top of beat-emitting equipment or heated objects such as a car and
etc.
14. In the following situations, unplug the Digital Visualizer from the wall outlet
and refer servicing to licensed service personnel: