Lumens Technology PS760 User Manual

Page 57

English -

Press [MENU] to exit the Ethernet OSD menu.

Repeat steps 3 ~ 4 and check IP address.

The images

outputted are not

clear, and the moire

appears

Please refer to the manual (

Attachment 1

), confirm the

voltage frequency and reset it according to

Chapter 9 DIP

Switch Settings

The live image does
not display after you
login to the website

1. Please install the ActiveX control according to the

instruction on the screen

2. If the instruction for installing the ActiveX control does

not appear, please follow the following steps to confirm

and remove the old version of ActiveX control

components, and then re-install the ActiveX control

components.

2.1 Remove the components (Browser IE 8.0/IE

9.0):
Open the IE browser, activate [Tool] → [Manage

Add-ons] → in the drop-down menu of [Display] at

the left side, select [All add-ons]. Then, after
selecting “GFFMpeg Class” and “GoDB Class”,
right-click the mouse to open the menu, and click

[More Info (R)]. Click the [Remove] button at the

bottom left, and then press the [Close] button at the

bottom right to complete the removal of

components.

2.2 Remove the components (Browser IE 7.0):

Open the IE browser, activate [Tool] → [Manage

Add-ons] → [Enable/Disable Add-ons] → in the

drop-down menu of [Display], select [Add-ons that

have been used by Internet Explorer]. Then, after
selecting “GFFMpeg Class” and “GoDB Class”,
press the [Delete] button at the lower right corner.

2.3 After reloading the website, please follow the

instruction on the screen.

Q: A warning message (“Windows has blocked this software because it can't
verify the publisher.”) appears when installing the ActiveX controls as shown
in the figure below: