Lumens Technology PS760 - Manual (Page 17)

English - 16
Chapter 5 Start Using
: Please adjust it to be suitable for the local voltage frequency of
50/60Hz. For the frequency in actual use, please refer to the
manual. (
Attachment 1 )
1. Remove the lens cap.
2. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
3. Pull up the lamp arm to a proper position.
4. Place an object to be displayed under the camera.
5. Press [POWER] button to turn on the power. (Remark: Do not
press [POWER] button until the red light stays lit)
6. Press [AUTO TUNE] button to optimize the image. You are ready to
teach/present.
: According to your request, you can adjust the camera head
slightly to aim at the center of the documents when the anchor
of lens was reached.
 When using the remote control, aim at the remote sensor on the DC190,
and press the power button.
 Once PS760 is turned on, the LED indicator on the control panel will
light up red. Please contact your dealer if the LED is not on.