Setting time and date, Auto clock, Setting time and date setting auto clock – Daewoo SG-9210P User Manual

Page 20

Setting time and date

■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure

below.

Call up the player’s "SETUP" menu,
choose "VCR SETUP", then "CLOCK SET".

Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.

Store with [OK] button and exit with [SETUP] button.

CLOCK SET

0-9:SETUP (HOUR)

/➝:CORRECT SETUP:END

TIME - - : - -

DATE - - / - - /- - - -

CLOCK SET

0-9:SETUP (HOUR)

/➝:CORRECT

OK:CONFIRM SETUP:END

TIME 06:05

DATE 07/05/2006(SUN)

Auto clock

■

Auto Clock is only available for models with the VPS/PDC function (see page 28).
Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will
automatically use this time and date during the initial setting up procedure during normal use, and every
time you switch the video off at the mains. If you find that this time and date is incorrect you can remove
this feature by following the steps below changing it to OFF mode, you will then have to manually set the
time and date, see above.

AUTO CLOCK

ON
OFF

PR+/-:SELECT
OK:CONFIRM SETUP:END

VCR SETUP

CLOCK SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK

PR+/-:SELECT
OK:CONFIRM SETUP:END

Setting time and date

Setting Auto clock

➝

DC-G8GD1P-JL (DESUK) 2006.4.19 9:42 AM ˘