Daewoo SG-9210P - Manual (Page 13)

11
Setting up your player
With this connection, if your player is receiving CH BBC1 and your TV is displaying CH3, when you press the [TV/VCR]
button on the remote control, your TV will automatically display the CH BBC1. “VCR” will be shown in the display.
In this mode, to change the viewing channels the [PR-] and [PR+] buttons on the player remote need to be used. To
switch off this mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will get better
pictures and sound quality if you connect your player using a scart lead.
■ Before you start, unplug all the equipment from the mains supply.
Television
Aerial
The type of aerial you should
use, depends on local
interference and how far you
are from the transmitter. You
should contact a local
retailer if you have any
questions about your aerial.
Back view of your player
200-240V~,
50/60 Hz
Television
Aerial
Back view of your player
200-240V~,
50/60 Hz
Scart lead (not supplied)
(Option 1) - Connecting your player through RF lead
(Option 2) - Connecting your player through a scart lead
Installation
DC-G8GD1P-JL (DESUK) 2006.4.19 9:42 AM ˘ ` 11