Directed Electronics DMP040 - Manual (Page 43)

© 2005 Directed Electronics—all rights reserved
4 43 3
d
D DIIS SP PL LA AY Y T TA AB B
The Display tab includes Brightness, TV Standard, and Display items. The
Brightness and Display are not applicable to the DMP040.
N NO OTTEE:: Brightness settings selected in the settings menu will be
recorded and kept. Brightness settings selected while watching
a movie will reset to the default selection in the settings menu
when the unit is shut off.
1. Enter Setting menu, the Display tab is the default tab (see figure above).
2. Push the Navigation button down to select Brightness, TV Standard, or
Display. Refer to the table below for the settings available.
Setting Item Method and Purpose Options
Brightness
Push Navigation button to right or
left to adjust display brightness Adjust brightness to meet
the desired level.
TV Standard
Push Navigation button to right
or left to select a video standard
NTSC/PAL
Display
Push Navigation button to right or
left to select the output device
LCD/TV—In TV mode the
3.5" LCD screen will be
blank. When powered off
the unit will revert to the
3.5" LCD screen operation.