Directed Electronics DMP040 User Manual

Page 28

Push the Navigation button to the right to fast-forward video playback,
each push increments from FFx2, x4, x8, x16, and x1. (Push once to fast-
forward by 2x, twice to fast-forward 4x, etc.) Press in on the Navigation
button to playback the video at normal speed.

10. Push the Navigation button left to rewind the playback, each push incre-

ments from RWx2, x4, x8, x16, and x1. (Push once to rewind by 2x, push
twice to rewind 4x, etc.) Press in on the Navigation button to playback the
video at normal speed. When pressing to fast-forward or rewind, you will see
the display below showing playback status and elapse time.

11. To adjust brightness/volume of the video playback press the “R” button. The

brightness/volume adjustment screen will appear. Push the Navigation but-
ton left or right to adjust. There are 16 levels of adjustment, set to the
desired level. A brightness/volume status bar will display as shown below,
it will disappear in a few seconds if no button is pressed.
Press the Navigation button down to access the volume adjustment bar. This
adjusts as previously discussed in the

Volume Adjustment—Music topic.

OTTEE:: The volume adjustment bar will not display if the unit is docked.

12. If during playback, the video is stopped or power is turned off, the

media

player

will automatically set a resume bookmark. When you attempt to play

the file again, a "Continue?" prompt will be displayed as shown below for
continuing the playback. Choose Yes to resume the video playback.

This manual is related to the following products:

DMP740