Dixon ZTR GRIZZLY - Manual (Page 47)

CARE AND MAINTENANCE
47
ELECTRICAL SYSTEMS:
Keep all connections clean and tight.
CLEANING THE MOWER:
Wash mower periodically. Clean above and below
deck.
High pressure washing and alkaline based soaps can
cause damage to bearings and other parts of the
mower. After washing your mower, start the engine and
engage the mower deck for a few minutes to disperse
any water that may have accumulated in bearings,
pulleys or fans.
Note: Allow mower to cool before washing. If
bearings are hot, they will draw moisture
inside as they dry and cause corrosion.
SERIAL NUMBERS:
The serial number is located on the rear left of the frame
at rear of engine.
WARRANTY:
Refer to warranty information (page 16).
PARTS/SERVICE:
See your Dixon® dealer for replacement parts, warranty
or service.