beautypg.com

Care and maintenance, Neutral adjustment – Dixon ZTR GRIZZLY User Manual

Page 42

background image

CARE AND MAINTENANCE

42

NEUTRAL ADJUSTMENT

1. Lift seat.

2. Block up the unit so that the drive wheels are off the

ground.

3. Loosen ball joint jam nuts on control rod.

Note: The front jam nuts are left hand threads.

4. With steering control arms in the “out” neutral

position, start the engine and run at fast idle.

5. Adjust the neutral position by turning the control rod

until the wheels do not rotate.

6. Re-tighten the jam nuts on the control rod and

check to see that the drive wheels are not turning.

7. Repeat steps 3-6 for the other side.

8. Shut off engine before removing the blocks.