Louroe Electronics RN-2 - Manual (Page 3)

MICROPHONE
BALANCE CONTROL
B1 B2
INTERCONNECTION DIAGRAM FOR
RN-2 MICROPHONE MIXER
MODEL RN-2 MICROPHONE MIXER
MICROPHONE #2
TERMINAL BLOCK TERMINAL BLOCK
MICROPHONE #1
TO INPUT OF ALL LOUROE BASE STATIONS
IF-1, IF-2, IF-4, IF-8 AUDIO INTERFACE ADAPTERS
R N - 2 LOUROE
E L E C T R O N I C S
MICROPHONE MIXER
TERMINAL BLOCK OF MODEL
A, B, C, D, D-V, E, K, AND L-DT MICROPHONES
A B C B 2 S P 1
A B C A B C
A B C SP
INPUT
OUTPUT
A B C
MICROPHONE
BALANCE
CONTROL
B1 B2
2 Conductor shielded cable, 22
gauge with a 24 gauge drain wire
NOTE: Unshielded cable is not
satisfactory for audio systems
WIRING REQUIREMENTS
West Penn 452 or equivalent
LOUROE LOUROE
WEST PENN 452
OR EQUIVALENT
INSTALLATION AND OPERATING INSTRUCTIONS
Page 3 of 4
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
rn_2_inst_3/15