beautypg.com

Installation and operating instructions, Fig. 1 description and function of controls – Louroe Electronics AP-4TB User Manual

Page 2

background image

INSTALLATION AND OPERATING INSTRUCTIONS

[1]

- Zone Selector Switches

Selects zone for monitoring. Press switch of desired zone to listen to

live monitored audio. Pressing more than one switch to monitor
several zones is possible, but not recommended. Audio pickup from
two or more zones will be mixed and difficult to distinguish.

[2]

- Filter-OUT Indicator

Lights (green) when audio filter is not in use. Indicates power is “ON”.

[3]

- Filter-IN Indicator

Lights (amber) when Filter Switch[5] is pressed to “ON” position.

[4]

- VCR-IN Indicator

Lights (yellow) when VCR Switch[6] is pressed to “ON” position.

[5]

- Filter Switch

Used only when audio playback is from a 12 or 24 hr. time lapse

recorder. Pressing Filter Switch[5] will illuminate red LED for 12/24 hour
mode. This enhances the quality of recorded audio playback. If
playback is from a DVR, filter switch is not used and should be in the
“OUT” position. If no recording device is used, then filter switch must
be in the “OUT” position. Otherwise live audio will be muted. The
green LED illuminates when filter switch is in the “OUT” position.

[6]

- VCR Switch

If AP-4TB is connected to a DVR, VCR etc. audio is

automatically recorded whether VCR switch[6] is in the “IN” or “OUT”
position. But for audio playback through the AP-4TB, VCR
button must be pressed in the IN position. If no DVR or VCR is used,
VCR switch must be in the out position.

[8]

- Talkback switch

Press to talk to remote speakers. Select a zone by pressing the appropriate

Zone Selector Switch[1] to talk to desired zone. The built-in Talk back
Microphone[11] is located above the Talkback Switch [8].

[9]

- Talkback Control Knob

Rotate knob clockwise to increase the volume of talkback output;

counterclockwise to decrease.

[7]

- Volume Control Knob

[10] - Headphone Jack

Used for private listening. Any 3.5mm stereo headphone with 8 to

600

W impedance may be used. Speaker is muted when headphone is used.

[11] - Talkback Microphone

Built-in microphone for talkback to remote speaker.

[13] - Monitor Speaker

Delivers audio through speaker. Muted when a headphone is plugged

into the Headphone Jack[10].

(includes DVR’s)

(not used with DVR’s)

(includes DVR’s)

[1]

[10]

[11]

[12]

[13]

[2] [3] [4]

[5] [6]

[7]

[8]

[9]

Fig. 1

Description and function of

controls

ZONES

FOUR ZONE AUDIO SURVEILLANCE w/ talkback

PHONES

POWER

MIC

VOLUME

TALKBACK LEVEL

FILTER

VCR

OUT

IN

IN

1

2

3

OFF

MAX

OFF

MAX

AP-4TB

MADE IN USA

4

PRESS

&

TALK

[12] - Power Switch

Turns on power to the unit. Illuminates green when powered

Rotate clockwise to increase volume of monitored audio produced
through Monitor Speaker [13]. Counterclockwise to decrease.

INSTALLATION AND OPERATING INSTRUCTIONS

Page 2 of 8

LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406

TEL (818) 994-6498

FAX

994-6458

website: www.louroe.com e-mail: [email protected]

(818)

®

ap4tb_inst_3/15

This manual is related to the following products: