Louroe Electronics TLM-E - Manual (Page 4)

INSTALLATION OF TLM-E SPEAKER/MICROPHONE
Model TLM-E is designed for mounting to a wall or flat surface. Included are 2 back boxes, a metal backbox for surface
mounting to a wall and a plastic back box for flush mounting or flat surface.
1. Drill an opening at top, bottom, side or back for passing wiring or connecting conduit. Four holes are
located inside the metal backbox for attaching back box to a wall.
Four screws are supplied for attaching the TLM-E faceplate to the back box.
INSTALLATION AND OPERATING INSTRUCTIONS
Page 4 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818) ®
SPECIFICATIONS
Output of microphone (Mic)
Frequency Response (Mic)
Current Drain (mic)
Speaker
Line Level (0 dB, 600 W @ 1KW )
40 Hz to 15 kHz
10 mA
4”, 7W w/ 70V transformer
Faceplate
Backbox
Weight
Shipping Weight
8” L x 6 1/43” W
8” L x 6 1/4” W x 2 3/4” D
1 lb 6 oz
6 lbs
tlm_e_inst_3/15