Leprecon LP-2000 - Manual (Page 11)

11
Operating the LP-2000 as a Manual Console
(1) Set all X and Y channel faders, and the PRESET master fader to
zero.
(2) Set both X and Y Crossfaders fully downward, to the Y scene
position.
(3) Bring the MASTER fader up to full. No stage lights should
come on.
(4) Set up the first scene on the X channel faders. The X scene
is currently inactive, so the stage should remain dark.
(5) Push the X and Y Crossfaders up to the X position, and the X
scene should now light the stage.
(6) Set up the next scene on the inactive Y channel faders, while
the X scene is still lighting the stage, then switch to the
Y scene by moving the X and Y Crossfaders to the Y position.
(7) Continue to set up subsequent scenes in this manner, by alternating between
the X and the Y groups.