Leprecon LP-X24 V.3 Addendum Video Features - Manual (Page 6)

Console and Keyboard Buttons
Console Buttons that are Disabled in Video Mode
•
Only softkey 1 (Switch to LCD Mode) is enabled in Video Mode. All other softkeys
are disabled.
•
All four encoders (below and to the right of the LCD) are disabled in Video Mode.
•
The Fixture button does not work in Video Mode. It has a point-and-click
replacement in video mode.
Items that are Still Controlled Only from the Console
Some functions are still controlled only from the console. They do not have a Video
Mode counterpart.
•
Switch between Run, Record, Edit and Setup modes
•
Switch between Stack, Playback and Scene modes
•
Bump and Filter buttons
•
Select buttons
Console Buttons that Work in Both Modes
•
Channel, Thru, Except, And, Level and Dim buttons all work the same. The dialog
box that appears when the buttons are pressed is very similar to the on-board
display.
•
Use the Clear key on the console to clear instrument selections during programming.
•
Yes and No/Esc work in both modes.
•
The four encoders (wheels below and to the right of the LCD) are enabled only in
some instances. For example, they scroll the label lists in the Label Picker screen.
Keyboard Tips
The keyboard provides a few additional shortcuts for use in Video Mode.