Leprecon VX Series Dimmer - Manual (Page 4)

4
2. Installation Options
The VX/ and MX dimmers can be shipped with user installed hardware for the intended
application. If your order included either Rack mount or Stand-alone kits, the hardware is included
in the package for the dimmer.
2.1. Rack Mount Kit
The Rack mount kit, CAE # 90-04-0012, for the VX and MX dimmers include the following items;
1) Rack mount ears 2 pcs. 20-2710
2) Rear support bracket 2 pcs. 20-2725
3) Screw, 6-32 x 1/2" 4 pcs 16-2112
4) Screw, 8-32 x 3/8" 6 pcs 16-3105
To install rack ears, simply screw the brackets to the left and right side of the dimmer. Use the
larger #8 screws provided, and tighten securely.
The Rear support brackets attach to the back of the dimmer, using the screws that fasten the
backpanel to the sides. Locate and remove these #6 screws, two on each side. Discard the
original screws, and attach the rear support bracket with the new longer screws supplied.
Warning: Do not use screws longer than those provided for attaching
hardware. Longer screws may contact live parts inside the dimmer and
present a shock hazard.
2.2. Stand Alone Kit
For applications when the dimmer is not rack mounted, accessory handles and feet may be
installed. The VX / MX Standalone Kit, CAE # 90-04-0011, contains these parts:
1) Handles 2 pcs. 18-1034
2) Screw, #8-32 x 3/8" 6 pcs 16-3012
3) Lockwasher, #8 split ring 10 pcs. 16-3802
3) Rubber Foot 4 pcs. 18-3012
4) Screw, #8-32 x 1/2" 4 pcs. 16-3014
To attach the handles, locate the three holes in each side provided for the handles. Use the six
shorter #8 screws with the lockwashers to attach the handles. Tighten the screws securely.
The rubber feet attach to the bottom side of the dimmer with the longer #8 screws. Tighten the
screws securely.
Warning: Do not use screws longer than those provided for attaching
hardware. Longer screws may contact live parts inside the dimmer and
present a shock hazard.