D-Link DES-1005D - Manual (Page 14)

4
allocated for each port, while controlling the data flow
between the transmit and receive nodes to guarantee against
all possible packet loss.
The Switch is an unmanaged 10/100 Fast Ethernet Switch
that offers solutions in accelerating small Ethernet
workgroup bandwidth. Other key features are:
Uplink/ MDI-II (media dependent interface) port for uplink to another
switch, hub or repeater.
Store and forward switching scheme capability. As the result of complete
frame checking and error frame filtering, this scheme prevents error
packages from transmitting among segments.
NWay Auto-negotiation for any port. This allows for auto-sensing of speed
(10/100Mbps) thereby providing you with automatic and flexible solutions in
your network connections.
Flow control for any port. This minimizes dropped packets by sending out
collision signals when the port’s receiving buffer is full. Note that flow
control is only available in half duplex mode.
Data forwarding rate per port is at wire-speed for 100Mbps speed.
Data forwarding rate per port is at wire-speed for 10Mbps speed.
Data filtering rate eliminates all error packets, runts, etc., per port at wire-
speed for 100Mbps speed.
Data filtering rate eliminates all error packets, runts, etc., per port at wire-
speed for 10Mbps speed.