Stove, Cl os e, Op en – Drolet ECO-35 User Manual
Page 14
14
c.
If the temperature in the auger rises beyond a certain acceptable level, two high temperature switches located under and above auger housing
will stop the fuel feed system and a warning
will appear.
CODE BEFORE
RESETING
TO
RESET
H1, H2, H3
OR H4
Heat exchanger and/or exhaust system
is/are clogged. Refer to the owner’s manual
for maintenance procedures.
Press simultaneously for 2 seconds
and
.
*** After 3 attempts, reset is no longer possible, call SBI technical support.
DAMPER OPERATION
CL
OS
E
STOVE
OP
EN
Figure 14
Damper operation