DeVilbiss SB-E2-2-531 - Manual (Page 2)

© 2003 ITW Finishing Systems and Products 2
Operation Manual
Advanced Conventional
Pressure Feed Spraygun
Important
Read and follow all instructions and Safety Precautions before using this
equipment
Description
The Compact pressure feed Spraygun Kit is complies to ATEX regulations 94/9/EC, protection level;
II 2 G X, Suitable for use in Zones 1 and 2
Important: These Sprayguns are suitable for use with solvent based materials. These guns are
not designed for use with highly corrosive and/or abrasive materials and if used with such materials it
must be expected that the need for cleaning and/or replacement of parts will be increased. If there is
any doubt regarding the suitability of a specific material contact your local Distributor or ITW Finishing
direct.
E E
Model Part Number
Example: COM-P430-14
Aircap
Fluid nozzle size
(14 = 1,4 mm)
ITW Finishing Systems and Products reserve the right to modify equipment specification with-
out prior notice.
EC Declaration of Conformity
We: ITW Finishing UK, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the
manufacturer of the Spraygun model Compact, declare, under our sole responsibility, that the
equipment to which this document relates is in conformity with the following standards or other
normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the
protection requirements of Council Directive 98/37/EC relating to Machinery Safety Directive,
and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective
Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X.
B. Holt, General Manager
30th June 2003