Back panel / control elements – LD Systems STINGER SUB 15 A G2 User Manual
Page 6

BACK PANEL / CONTROL ELEMENTS:
LD ESUB15G²
1
SPEAKON COMPATIBLE INPUT
Connect output from an external
amplifier.
2
SPEAKON COMPATIBLE OUTPUT
Connect other passive
subwoofers, e.g. LDESUB15G².
3
LOW-PASS SWITCH
In "ON“ position the internal low-
pass filter (120Hz / -12dB/oct.)
is activated. This mode is used,
when powering the subwoofer
without an external crossover.
Note: The subwoofers impedance
is 4Ω in this mode.
When the subwoofer is used with
an external crossover, switch to
"OFF“. In this mode the internal
low-pass filter is disabled and the
subwoofer can be used as am 8Ω
speaker.
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO
6
LOW PASS (120 Hz)
OFF (8 Ω)
ON (4 Ω)
1
2
3
This manual is related to the following products: