Dixon 114892-DCR2 - Manual (Page 7)

7
ASSEMBLY
1
COLLECTION MOUNT BRACKETS
(See Figure 1.)
FIGURE 1
FIGURE 3
RAM
1. To prevent damage to grass bags, remove
hitch from rear of chassis. Instead of removing
the hitch, you may prefer to mount it backward
(pointing to the front). If mower has just been
uncrated, the hitch should already be mounted
backward.
2. Attach bagger mount plate to rear of engine
guard. Use four 5-16-18 x 3/4" carriage bolts
and four 5/16-18" nyloc nuts. Refer to
illustration.
3. Attach a bagger strap to side hole in bagger
mount plate. Use 3/8-16 x 1" carriage bolt,
3/8" washer and 3/8-16" nyloc nut. Attach
other end of bagger brace to top front hole in
engine guard, using existing frame hardware.
Refer to Figure 1. Repeat for other side of
machine.
MOUNT PLATE
STRAP
STRAP
8050-161
1. To prevent damage to grass bags, remove
hitch from rear of chassis. Instead of removing
the hitch, you may prefer to mount it backward
(pointing to the front). If mower has just been
uncrated, the hitch should already be mounted
backward.
2. Attach bagger mount plate to rear of engine
guard. Use four 3/8-16 x 3/4" carriage bolts
and four 3/8" nyloc nuts. Refer to illustration.
3. Attach a bagger strap to side hole in bagger
mount plate. Use 3/8-16 x 1" carriage bolt,
3/8" washer and 3/8-16" nyloc nut. Attach
other end of bagger brace to top front hole in
engine guard, using existing frame hardware.
Refer to Figure 2. Repeat for other side of
machine.
KODIAK
8050-162
MOUNT PLATE
STRAP
STRAP
FIGURE 2
4. For both Ram and Kodiak, slide bagger support
down into bagger mount plate.
BAGGER
SUPPORT
8050-163