Dixon 114892-DCR2 - Manual (Page 10)

10
ASSEMBLY
FRONT WEIGHTS - KODIAK
CAST COUNTERWEIGHT
WEIGHT BAR HOLD DOWN
FRONT WEIGHT BAR
1. Remove mower foot plate and floor pan.
2. Align weight bar to the front of the frame.
See diagram.
3. Secure weight bar to mower frame with four
5/16-18 x 1 1/4" hex bolts from kit, reuse the
four 5-16" washers and four 5/16" nyloc nuts
that were removed from the foot plate.
4. Place all front weights on front weight bar.
5. Place holddown bar over front weights and
secure to front weight bar using two 3/8" x 1"
clevis pins and two hair pins.
6. Reinstall floor pan.