LD Systems DPA 260 - Manual (Page 18)

18
1 2 3 4 5 6 7 10 9 11 12
13
14 15 16
17
18
19
20
8
21
25
22
24
23
26
27
28 29
Out 1-6 Gain -> ENTER -> PM2/3 dB <- ESC
Out 1-6 Limiter -> ENTER -> NAV/PM1 Attack ms <- ESC
PM2 Release s <- ESC
PM3 dBu <- ESC
Out 1-6 Delay -> ENTER -> PM2/3 m/ms <- ESC
Out 1-6 Polarity -> ENTER -> PM2/3 Normal <- ESC
Invert <- ESC
Display: Display:
LDDPA260 SOFTWARE (REPRESENTATION) / LDDPA260 SOFTWARE (BEISPIELDARSTELLUNG) /
LOGICIEL LDDPA260 (COPIE D'ÉCRAN) / SOFTWARE LDDPA260 (CAPTURA DE EJEMPLO) /
PROGRAM LDDPA260 (PRZYKŁADOWY WIDOK) / SOFTWARE LDDPA260 (IMMAGINE DI ESEMPIO)
DPA260 SOFTWARE / DPA260 SOFTWARE / LOGICIEL DPA260 / SOFTWARE DPA260 / PROGRAM
DPA260 / SOFTWARE DPA260
EN NOTE: If a connection is established between DPA260 controller and PC/Software via USB or RS485, all the controls on the front panel of the
controller are locked.
1. Opening controller presets stored on a storage medium.
2. Backing up modified and newly created controller presets on a storage medium.
3. Transferring presets to the DPA260 controller. Up to 24 controller presets can be stored on a DPA260 unit.
4. Displaying controller presets from the DPA260.
5. Copying the settings of one input channel to another.