Lacava llc 4 – Lacava 1432 User Manual

Page 4

LACAVA LLC

Installation Instructions/Instrucciones de Instalación

1. Place the cartridge bodies up through their designated

holes. Then slide a handle base onto each extension

and thread onto the brass body. Make sure the set screw

holes are facing towards the back.

2. Tighten each locking nut upwards as far as possible by

hand until tight (DO NOT overtighten. avoid damage

to mounting surface).

3. Slide a lever handle onto each cartridge extension,

taking note as to which one is marked for hot, cold, &

diverter. Keep in place by tightening each set screw

using the provided Allen wrench.

Back