Lacava TUB07 - Manual (Page 4)

4 | P a g e
4_Once the tub drain shoe has been connected to the P-trap, lower the tub onto the drain.
After removing the plug from the upper portion of the drain by turning counter-clockwise, screw
the drain body from the inside of the tub onto the tub drain shoe making sure that the flat
gasket is correctly installed between the tub drain shoe and the bottom of the tub. Place a bed
of silicone around the drain interior to ensure a tight seal if necessary.
6_Thread the drain plug back onto the upper portion of the drain
9_Apply a ¼” bead of 100% silicon around the base of the tub to prevent any future water
infiltration due to spillage.