Lacava SC010 - Manual (Page 4)

LACAVA LLC 4
Install Lavatory:
1. Turn the lavatory upside down and apply a small
bead of silicone on the underside of the molded lip.
:
2. Turn the lavatory over and align with the cut out
in the countertop. Then put in place and press
firmly around the edges of the lavatory to create
a tight seal. Remove any access sealer.
3. Once the adhesive has set, then apply a bead of
silicone around the edge and smooth out.
4. If the lavatory is installed onto a cabinet with
enclosed back wall, the lavatory can be fastened
to the cabinet with screws where the mounting
bolts holes are molded.
5. FInish installing the trap assembly, connect all
plumbing elements and test for water leaks.