Lacava 1514 - Manual (Page 5)

LACAVA LLC 5
10. Place the small escutcheon over the spout connection
and screw the spout into place until tight. It is recomm-
ended to wrap the threaded end of the spout with teflon
tape prior to installation.
11. Press the large escutcheon into place over the cartridge
housing until flush against the wall.
12. Press the handle onto the cartridge stem and then using
the provided Allen wrench, tighten the set screw to keep
in place.
13. Push the cap cover into its designated hole over
the set screw.
14. If desired, place a small bead of silicone around outside
edge of each escutcheon.
15. Turn on the water supply and check for any leaks.