Installation steps – Lacava 7000 User Manual

Page 5

LACAVA LLC

3. Mark and drill holes in the floor to fix the pedestal

to the floor with hardware and screws (not supplied)

proper for the floor type installed. Make sure the screws

do not interfere with any pipes and will not puncture

any water supply or outlet pipes.

4. Place the pedestal in its designated location and

fasten it to the floor.

5. Insert the p-trap only about 2” into the prepared drain

outlet with 1 1/4” trap adapter and tighten the adapter

onto the PVC pipe. This is to leave room to attach the

drain to the trap.

6. Assemble all parts of the drain and install onto the

lavatory, including the drain tail pipe.

Test the lavatory for leaks around the drain at this point

and before installing it on the pedestal.

HANDLE WITH CARE TO AVOID DAMAGES AND SCRATCHES

TO THE SURFACE OF THE LAVATORY AND THE PEDESTAL.

Installation Steps

2”