Denon PMA-2000AE - Manual (Page 14)

ENGLISH
Operation
• M a k e s u r e t h a t a l l t h e c o n n e c t i o n s a r e p r o p e r b y
referring to the rear panel.
• C h e c k t h e p o l a r i t y ( p o s i t i v e a n d n e g a t i v e ) o f
connections, and the directivity of stereo separation
(right cord to right channel terminal, and left cord to left
channel terminal).
• Check the directivity of pin cord connection.
Preparation
2 Setting of each knob
• Turn the VOLUME control knob counterclockwise, to
minimum position.
• Set the BASS, TREBLE and BALANCE control knob, to center
position.
• Set SOURCE DIRECT switch to “OFF ( £ )”.
After checking the above items, turn on the power, the amplifier
is set in the ready mode in a few seconds.
2 Checking connections
VOLUME SOURCE DIRECT INPUT SELECTOR
REC OUT SELECTOR
P.DIRECT
TREBLE BALANCE BASS
FUNCTION
MUTING
CALL
CLEAR
PROGRAM DIRECT
1 2 3
4 5 6
7 8 9
+10 0
VOLUME
POWER
FUNCTION
1
Select the input source to be played.
FUNCTION
(Main unit) (Remote control unit)
W h e n “ P H O N O ” i s s e l e c t e d , p r e s s t h e CARTRIDGE
switch on the rear panel of the main unit to select “MC
(
¢ )” or “MM ( £ )”.
2
Start playback on the selected component.
3 Turn the VOLUME , BASS , TREBLE and
BALANCE control knob to yield an appropriate
volume and sound quality.
For operating instructions, refer to the component’s
manual.
NOTE:
If P. DIRECT button is set to ON position, P. DIRECT terminals is
selected, and input indicator.
Playing the input source
9
ENGLISH