La Crosse Technology WS-9257U-IT - Manual (Page 26)

26
Note:
Always ensures that the unit locks onto the screw head before releasing.
POSITIONING THE THERMO-HYGRO TRANSMITTER:
The thermo-hygro transmitter can be placed on any flat surface or wall mount
using the bracket which doubles as a stand or wall mount base.
To wall mount:
1.
Secure the bracket onto a desired wall using the screws and plastic anchors.
2. Clip the transmitter onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the desired
locations to check that the outdoor temperature/humidity readings are receivable. In
event that the signal is not received, relocate the units or move them slightly as this
may help the signal reception.