La Crosse Technology WS-9035U User Manual
Page 20

20
MAINTENANCE AND CARE INSTRUCTIONS
• Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units.
• Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and
casings.
• Do not submerge in water.
• Immediately remove all low powered batteries to avoid leakage and damage.
• Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.
SPECIFICATIONS
Weather data measuring range:
Indoor:
14.2
°F to 139.8°F with 0.1°F
resolution (0
°C to 59.9°C with
0.1
°C resolution) “OFL”
displayed if outside this range
Outdoor and dew point:
-21.8
°F to 157.8°F with 0.1°F
resolution (-29.9
°C to 69.9°C
with 0.1
°C resolution) “OFL”
displayed if outside this range
Wind chill:
-21.8
°F to 157.8°F with 0.1°F
resolution (-29.9
°C to 69.9°C
with 0.1
°C resolution) “OFL”
displayed if outside range
Indoor relative humidity
measuring range:
1% to 99% with 1% resolution
(“- -” displayed if outside this
range
Outdoor relative humidity
measuring range:
1% to 99% with 1% resolution
(“- - “ displayed if outside this
range
Wind speed measuring range:
0 to 111.8 mph (0 to 50 m/s)
Weather data checking interval:
Indoor temperature checking
interval:
Every 15 seconds
Indoor humidity checking
interval:
Every 20 seconds
Outdoor temperature checking
interval (remote
temperature/humidity sensor):
Every 128 seconds
Outdoor humidity checking
interval:
Every 128 seconds
Wind speed checking interval:
Average of 128 seconds with
highest gust
Outdoor temperature, humidity
and wind speed reception
(indoor weather station):
Every 128 seconds
Transmission range:
300 feet (in open space)
Power Supply:
Indoor weather station:
3 x AA, IEC LR6, 1.5V
Remote temperature/humidity
sensor:
2 x AA, IEC LR3, 1.5V
Remote wind speed sensor:
Supplied by remote
temperature/humidity sensor
Battery life cycle:
Approximately 12 months
Recommended battery type:
Alkaline