La Crosse Technology WS-8147U-IT - Manual

1
WS-8147U-IT
RADIO-CONTROLLED CLOCK WITH OUTDOOR WIRELESS
TEMPERATURE AND MOON PHASE
INSTRUCTION MANUAL
Contents
Language
Page
__________________________________________________________________
English 1
French
Spanish
2
TABLE OF CONTENTS
Topic Page
Features 3
Battery Installation
4
Setup 5
Atomic time - WWVB Radio Controlled Time 5
Function keys 6
LCD Screen 7
Manual Settings 7
Changing the display mode 10
Alarm setting 11
Moon phases 12
Outdoor transmitter 13
915 MHz Reception 13
Positioning and Mounting 14
Care and maintenance 16
Specifications 17
Warranty 18
INSTANT TRANSMISSION is the state-of-the-
art new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate
update (every 4 seconds!) of all your outdoor
data measured from the transmitters: follow
your climatic variations in real-time!
This product offers:
3
LCD1
display
Battery cover
Hanging holes
LCD2
display
Foldable stand
FEATURES:
RADIO-CONTROLLED CLOCK:
 WWVB Radio controlled time with manual time setting
 Time display: hour, minute, second
 12/24h time display
 Alarm (with snooze)
 Calendar display (month, day, weekday, year)
 Time zone
 Daylight savings time ON/OFF option (DST)
 Indoor and outdoor temperature display
 Temperature display in ºF/ ºC
 Moon phase display
 Indoor humidity display in RH%
 Wireless transmission at 915MHz
 Signal reception intervals at 4 seconds
 Low battery indicator
 Wall mount or freestanding
Function keys
4
OUTDOOR TEMPERATURE TRANSMITTER:
 Remote transmission of outdoor temperature to the
radio-controlled clock at 915 MHz
 Wall mounting case
ALKALINE BATTERIES ARE RECOMMENDED FOR USE IN BOTH UNITS. AVOID USING
RECHARGEABLE BATTERIES.
TO INSTALL OR REPLACE BATTERIES IN TEMPERATURE TRANSMITTER
(INSTALL BATTERIES IN TRANSMITTER BEFORE INSTALLING BATTERIES IN RADIO-
CONTROLLED CLOCK)
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow
the steps below:
1.
Remove the battery cover by pushing down towards bottom of transmitter and sliding
cover out.
2. Insert the batteries, observing the correct polarity (see marking inside battery
compartment).
3. Replace the battery cover on the unit.
TO INSTALL OR REPLACE BATTERIES IN THE RADIO-CONTROLLED CLOCK
The radio-controlled clock uses 2 x AA,1.5V batteries. To install and replace the batteries,
please follow the steps below:
1.
Insert finger or other solid object in the space at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
Holder