0 chronograph mode, 1 daily alarm mode, 0 daily alarm mode – La Crosse Technology UV100 User Manual

Page 5: 10 uv index mode

7.0 Chronograph Mode -

Chronograph Mode

6.1 Daily Alarm Mode -

Setting the Daily Alarm Mode

! To set the Daily Alarm Time, press and hold the

[mode] button to select the setting display.

! When the 'minute' digits flash on the display,

press the [start/stop] or [lap/reset] button to set
the minute by scrolling of 1 (hold down the button
to scroll the setting faster).

! When the 'hour' digits flash on the display, press

the [start/stop] or [lap/reset] button to set the hour
by scrolling of 1 (hold down the button to scroll
the setting faster).

When the setting

is finished, press and hold

the [mode] button to exit the setting sequence.

! The setting display will change to Daily Alarm

Mode automatically if no key-stoke has been
activated for about 3 minutes.

Daily Alarm Sound
! When the daily alarm is ON, the watch starts

beeping at the alarm time for about 30 seconds.

! When the beeps sounds, it can be stopped

prematurely by pressing one of the buttons,
except the [light] button.

6.0 Daily Alarm Mode -

Daily Alarm Mode

(Alarm OFF & Chime OFF)

Daily Alarm Mode

(Alarm ON)

3. Lap time
(1 lap only)

time

[start/stop]

[lap/reset]

2. Accumulative
elapsed time

1. Elapsed time

1) Elapsed time,
2) Accumulative elapsed time, and
3) Lap time (1 lap only)

Chronograph Display
! The display shows the 'Zero' display, if the Watch

or the chronograph has been reset.

! The Chronograph Mode Indicator exhibits on the

upper row of the display.

! The chronograph time (hours, minutes, seconds

and 1/100 second) exhibits on the lower row of
the display.

! T h e m a x i m u m c o u n t i n g r a n g e o f t h e

chronograph is 9 hours, 59 minutes and 59.99
seconds.

This Watch includes a Chronograph Mode, it can
measure 3 different types period of time:

Mode Indicator

Chronograph Time
(1/100 Second)

Chronograph
Time (minute)

Chronograph
Time (hour)

Chronograph
Time (second)

[start/stop]

Current Time

Alarm
Time

Mode
Indicator

! This Watch includes a daily alarm for user's

convenience. The daily alarm can be set by the
user.

! Check the coming '6.1 Setting the Daily Alarm

Mode' Section for more detail on how to set the
Daily Alarm Mode.

The Daily Alarm Display
! The Current Time (hours, minutes) shows on the

upper row of the display.

! The Alarm Time (hours, minutes) shows on the

lower row of the display.

! Press the [lap/reset] button once to select

between ON and OFF the hourly chime. When
the Hourly Chime Indicator ' ' appear

s, the

hourly chime is ON (the Watch will beep once on
the hour).

To Select between ON and OFF the Daily Alarm
! Press the [start/stop] button once to set between

ON and OFF the Daily Alarm. When the Daily
Alarm Indicator ' ' appear

s, the daily alarm is

ON (the watch starts beeping at the alarm time for
about 30 seconds).

To Select between ON and OFF

for the

Hourly Chime

scroll the

setting by

increment of 1

Hour

Minute

hold

[mode]

hold

[mode]

scroll

the setting

faster

scroll

the setting

faster

[start/stop]

[lap/reset]

hold

[start/stop]

hold

[lap/reset]

Daily Alarm Mode
Setting Sequence

Daily Alarm Mode

Chronograph Mode

(Zero Display)

Elapsed Time, Accumulative Elapsed Time and Lap Time

: Stop Counting

: Counting

Daily Alarm
Indicator

scroll the

setting by

decrement of 1

[lap/reset]

Daily Alarm Mode

(Chime ON)

Hourly Chime
Indicator

5.10 UV Index Mode

- Calibrating the UV Index

scroll the

setting by

increment of 1

'LO' Lower

UV Index

Alarm

'CAL'

Calibration

'HI' Upper

UV Index

Alarm

hold

[mode]

hold

[mode]

scroll

the setting

faster

scroll

the setting

faster

[start/stop]

[lap/reset]

hold

[start/stop]

hold

[lap/reset]

UV Index Mode

Setting Sequence

UV Index Mode

(Current UV Index Display)

scroll the

setting by

decrement of 1

To Calibrate the UV Index
! When the settings of the previous '5.7 Setting the

Upper and Lower UV Index Alarms' Section

are finished, press the [mode] button once to

calibrate the UV Index.

When the 'CAL' indicator appear

s, press the

[start/stop] or [lap/reset] button to select the pre-
determined CAL between 0 to 50 by scrolling of 1
(hold down the button to scroll the setting faster).
Check the previous '5.9 To Determine the
Calibration Factor (CAL)' for more detail on how
to determine the CAL.

! When the above settings finished, press and hold

the [mode] button for about 2 seconds to exit the
setting sequence.

! The setting display will change to UV Index Mode

automatically if no key-stoke has been activated
for about 3 minutes.