La Crosse Technology 308-179or - Manual (Page 2)

2
TIME ALARM
The TIME ALARM button moves through alarm set
mode and confirms settings.
The UP arrow (on back) will increase a value.
The DOWN arrow (on back) will decrease a value.
SET ALARM
From normal time and temperature display mode,
press and
release the TIME ALARM button once to show alarm time. Hold
the TIME ALARM button for three seconds to enter alarm set
mode.
 HOUR: The Hour will flash, use the ARROW buttons to set the
hour, and press TIME ALARM button to confirm. Then press the
TIME ALARM button again switch to minute setting.
 MINUTES: The Minutes will flash, use the ARROW buttons to
set the minutes, and press TIME ALARM button to confirm.
 Press the TIME/DATE button to return to normal mode
Note: When no buttons are pressed for ten seconds, the
Temperature Station will save the last change and default back to
normal time and temperature display mode,.
ACTIVATE/DEACTIVATE ALARM
 From normal time and temperature display mode, press and
release the TIME ALARM button once to show alarm time.
 Press and release the TIME ALARM button repeatedly to turn
the alarm ON/OFF. The alarm icon appears when alarm is
activated.
SNOOZE
When the alarm sounds press the TIME ALARM button to snooze
the alarm for 10 minutes. The snooze option can be repeated three
times.
Note: while the alarm sounds press any button except the TIME
ALARM button to turn the alarm off.
LOW BATTERY
• When this low battery icon appears in the indoor (IN) reading
section, replace the batteries in the weather station.
• When this low battery icon appears in the outdoor (OUT)
readings section, replace the batteries in the outdoor transmitter.
MIN/MAX TEMPERATURE
The Temperature Station will show the daily minimum and
maximum temperatures each day starting at midnight (12:00 AM).
The Temperature Station automatically resets the min/max
temperatures at midnight (12:00 AM).
• View MIN data: Press and release the MIN button to
view the minimum Indoor and Outdoor
Temperatures.
• Reset MIN data: Hold the MIN button for 3 seconds
and the Indoor and all Outdoor Minimum Temperatures will be
reset to current temperatures.
• View MAX data: Press and release the MAX button
to view the maximum Indoor and Outdoor
Temperatures.
• Reset MAX data: Hold the MAX button for 3 seconds
and the Indoor and all Outdoor Maximum
Temperatures will be reset to current temperatures.
Note: When no buttons are pressed for ten seconds,
the weather station will return to display the current temperature.
TEMPERATURE ALERTS
Alert values are set when they flash in the outdoor temperature
area. Temperature alerts are turned on or off in the Temperature
Alert box.
One or all the temperature alerts may be set.
Range for outdoor temperature alert:
-40°F to 140°F (-40°C to 60°C)
SELECT TEMPERATURE ALERT VALUES
Hold the TEMP ALERTS button for three
seconds, until the temperature station beeps,
to enter alert setting.
 OUTDOOR HI alert will flash where the outdoor
temperature shows. Press the ARROW buttons to set the
alert value, and press the TEMP ALERTS button to confirm.
Then press the TEMP ALERTS button again switch to
OUTDOOR LOW setting.
 OUTDOOR LO alert will flash where the outdoor
temperature shows. Press the ARROW buttons to set the
alert value, and press the TEMP ALERTS button to confirm
and exit.
Note: After selecting temperature alert values use the next step to
turn individual alerts ON or OFF.
TEMPERATURE ALERTS ON/OFF
From normal time and temperature display mode,
press and
release the TEMP ALERTS button to toggle between:
o Outdoor HI
o Outdoor LO
 Press the UP ARROW button (Alert ON) to turn the selected
alert ON. The alert icon appears when alarm is activated.
 Press the DOWN ARROW button (Alert OFF) to turn the
selected alert OFF.
Note: When no temperature alerts are set the
Temperature Alert area will show OFF.
TEMPERATURE ALERT SOUNDS
 When temperature alert is ringing, corresponding alert
icon will flash.
 The alert will ring for five seconds every minute, until the
temperature is out of alert range.
 Press any button to stop alert. The alert icon will still show.
 Turn alert OFF: In normal mode, press and release the TEMP
ALERTS button to select the alert to turn off. With HI or LO alert
selected, press the DOWN ARROW button to turn that alert OFF.
TEMPERATURE TREND ARROWS
The indoor and outdoor temperature trend arrows will update every
30 minutes or less. These trends represent temperature changes
over the past three hours.
UP: Temperature rising more than 2°F/1°C in the past
three hours
RIGHT: Temperature has not changed more than
2°F/1°C in the past three hours.
DOWN: Temperature falling more than 2°F/1°C in the
past three hours