La Crosse Technology 308-1414B - Manual (Page 9)

Model: 308-1414B/308-1414W www.lacrossetechnology.com/support Page | 9
Deactivate Alarm
1. Press and release the ALARM button once to show alarm time.
2. Press and release the ALARM button to deactivate the Alarm.
3. The bell icon will disappear indicating the alarm is no longer active.
Snooze
1. When the alarm sounds, press the SNOOZE/LIGHT button to trigger snooze alarm
for 10 minutes. The snooze icon Zz will flash by the weekday when the snooze
feature is active.
2. To stop alarm for one day, press ALARM button, while in snooze mode. The bell icon
will remain solid.
Note: When the alarm sounds, it continues for 2 minutes and then shuts off
completely.
Heat Index/Dew Point
The HEAT/DEW button toggles between Heat Index, Dew Point, and Mold
Risk. Each feature will display for 10 seconds then return to default display if
the button is not pressed again.
Heat Index
Heat Index combines the effects of heat and humidity. It is the apparent temperature of
how hot it feels to a human being. As humidity increases, the body is unable to cool
effectively; therefore, the temperature will feel warmer.
View Heat Index: From a normal display, press the HEAT/DEW button once and Heat
Index will show in place of the outdoor temperature.
Note: Heat index will be the same number as the temperature until the outdoor
temperature is above 80 °F (26.7°C).
Dew Point Temperature
Dew Point Temperature is the saturation point of the air, or the temperature to which the
air has to cool in order to create condensation. The higher the dew points, the higher the
moisture content of the air at a given temperature.
View Dew Point Temperature: From a normal display, press the HEAT/DEW button
twice and Dew Point will show place of the outdoor temperature.
Note: Dew Point is lower than the actual temperature.
Search for Outdoor Sensor

Hold the HEAT/DEW button to search for the outdoor sensor.

The strength signal icon will animate until the sensor signal is received or
for 3 minutes if no signal available.
Temperature/Humidity Trend indicators
The indoor and outdoor temperature/humidity trend indicators will update every 30
minutes or less. These trends represent temperature changes over the past three hours.