Kussmaul Electronics 091-28 User Manual
Page 4
170 Cherry Avenue
West Sayville, NY 11796
www.kussmaul.com
Instruction Manual
1. Wire the solenoid valve to the vehicle’s starting circuit. Be certain that the solenoid is
energized only while the vehicle is cranking and de-energized at all other times.
Refer to Figure 2 for details.
The Air Eject is a precision device designed and manufactured for many years of reliable
service. Periodic servicing, cleaning and lubricating are important.
It is suggested that the cylinder assembly be inspected regularly and cleaned and
lubricated at a minimum once every six months.
In applications where contamination by water and road dirt are excessive, more frequent
servicing may be required.
Lubrication should be only with non-petroleum based lubricants such as Dow Corning DC-
4 Silicone grease, Silicone or Teflon spray.
WIRING
TO STARTER
SWITCH
STARTER
STARTER
SOLENOID
BATTERY
TO CHASSIS
GROUND
-
+
TO CHASSIS
GROUND
AIR
EJECT
Figure 2
AIR EJECT MAINTENANCE
Ph: 800-346-0857
Fax: 631-567-5826
File: 091-28 rev b.cdr
Rev: B, Date: 1-28-13