Kussmaul Electronics 091-159-30-120 User Manual
Page 3
NOTES AND CAUTIONS
NOTE
Do not permit the shore line to drop to the floor when it is ejected. Keep from falling by utilizing a bungee
cord restraint, cord reel or some other device. Dropping the connector may result in damage or breakage.
Kussmaul Electronics Co., Inc. does not Warrant the connector.
ABOUT CONNECTORS
The Super 30 Auto Eject is supplied with mating connector. We suggest that you utilize the connector
supplied. When replacing with another connector, test carefully that the new connector will eject properly.
TEST AND OPERATION
To test the unit make sure all wiring is complete. Plug in connector to the Super 30 Auto Eject and start
the vehicle. The connector should eject at this time.
The Super 30 Auto Eject disconnects the shoreline by extending a shaft to push the plug out of the unit.
A novel plug detector closes and opens the 120-volt A.C. Circuit after the mating connector is inserted and
before the connector is ejected. This eliminates arcing at the connector contacts and assures long contact
life. Because of this, the connector can be operated manually or automatically with no damage to the unit.