KIP 9900 - Manual (Page 95)

Chapter 2 Basic Operations 2-73
2. 8.16 User Mode P1 to P4
(Special Width Selection in Metric Mode)
In Metric Mode, the KIP 9900 has the ability to recognize roll media in a special width. One of two
or three close width choices can be fixed.
The available selection set are as follows.
User Mode Code Description
P1. Width Selection of 900 / 891 / 880mm
P2. Width Selection of B1 / 707 / 700mm
P3. Width Selection of A1 / 620 / 610mm
P4. Width Selection of A2 / 440mm
For example, User Mode P3 is fixed to “620mm” of A1 / 620 / 610mm
This means that you cannot choose either “A1” and “620mm” at a time.
If you fix User Mode P3 to “620mm”,
(1) any of A1 / 620mm / 610mm roll media is considered to be “620mm”.
(2) you have to set User Mode P3 to “A1” before you use A1 roll media.
The following example shows how to use “620mm” width instead of A1 standard width.
The same way is applied to any other choice of P1/P2/P3/P4 selection.
1. Press the [ MENU ] Key 19 times to select the User Mode P3. [ MENU ] Key lights green and
the Status Display indicates “P3.”.
User Mode P1/P2/P3/P4 are not displayed in default.
Contact your service personnel to enable this function.
Reference
MENU ENTER ONLINE
Press [ MENU ] 19 times.
MENU ENTER ONLINE