Dot Hill Systems SANnet II 200 - Manual (Page 25)

Supported memory type SDRAM memory for enhanced performance. Fast page memory
with parity for enhanced data security. ECC-protected.
Read-ahead operation Intelligent dynamic read-ahead operation for sequential data
accessing
Multi-threaded operation Yes
Scatter/gather supported Supported
I/O sorting Supported. Optimized I/O sorting for enhanced performance
Variable stripe size RAID5:
Optimization for random I/O (32k), optimization for sequential
I/O (128k), user selectable.
RAID3:
Optimization for random I/O (4k), optimization for sequential I/O
(16k), user selectable.
Advanced Features
Drive low-level format Supported
Drive identification Supported
Force the drive to light on the activity indicator for user to
recognize the correct drive.
Drive information listing Supported
Drive vendor name, model number, firmware revision, capacity
(blocks), serial number, narrow/wide negotiations and current
SCSI speed.
Drive read/write testing Supported
Configuration on disk Supported
The logical drive information is recorded on drive media.
Save/restore NVRAM to/from disks Supported
Save all the settings stored in the controller NVRAM to the logical
drive members
Save/restore NVRAM to/from file Supported
Save all the settings stored in the controller NVRAM to a file via
GUI or CLI on user’s computer
Host LUN geometry & user configurable
default geometry Capacity <64GB: Head=63, Sector=32, Cylinder=?
(depends on capacity)
64GB(depends on capacity)
128GB(depends on capacity)
256GB(depends on capacity)
512GB(depends on capacity)
1TB(depends on capacity)
User configurable geometry range Sector: 32,64,127,255 or variable
25