BQ Aquaris U Plus - Manual (Page 67)

67
// Aquaris U Plus
Complete User Manual - English
Multimedia
Motions
The Time Lapse and Fast motion modes are found in this section.
TIME LAPSE
This mode allows a scene to be captured as it changes over
time. It can then be played back at normal speed but with a
fast-motion effect. Time-lapse recordings can be made with
frame intervals ranging from 0.5 seconds to 10 minutes. Each
second of time lapse video requires 30 frames. The faster that
events move in the scene you are recording, the shorter the
time interval you should use. Following is a brief explanation
of the menu icons:
Enables/disables the flashlight.
Creates a grid to make it easier to frame the video.
FHD
1080
Sets the recording quality. You can choose between HD
720 and FHD 1080.
1s Choose the capture interval for your photos. Values range
from 0.5 seconds to 10 minutes.
Accesses the camera’s general settings.
FAST MOTION
This mode enables video recording in fast motion. This visual
effect is achieved by recording a scene at a lower rate of images
per second than the projection speed. When these sequences
are played back at a normal rate of images per second,
they appear to be playing in fast motion. Following is a brief
explanation of the menu icons:
Enables/disables the flashlight.
Enables/disables audio recording.
FHD
1080
Sets the recording quality. You can choose between HD
720 and FHD 1080.
2x
Sets the recording speed. You can choose between 2 and
4 times quicker.
Accesses the camera’s general settings.